Dipped 3 secs in Hoover Blue; Then a quick dip again in Hoover Blue to about 1 1/3" from the bottom at the lowest point. Finger swipes when glaze still very wet
Dipped in tenmoku about 2-3 secs (glaze seems thin). Made 2 stripes around the pot with wax resist. Then dipped into white, not quite covering the lower stripe (wiped white glaze off wax).
Dipped in Albany Black about 2-3 secs (glaze seemed slightly thick) to about 1" from bottom. Then a quick dip, top first, into white (thin) to about 2" from the bottom of the pot.
Quickly into Celadon (thin glaze). Clear over.
Dipped into Chun Mottled Blue. Dipped top into Chun Mottled Blue again to just below the 2 square stamps leaving the one lower square stamp with one coat only.
Opposite side of the previous item pictured. Dipped into Chun Mottled Blue. Dipped top into Chun Mottled Blue again to just below the 2 square stamps leaving the one lower square stamp with one coat only.
Dipped into Shino 1x - tried to be quick. Looks thick where it drained back over itself.
Tenmoku -quickly, seems thin. 2 stripes around with wax resist (which dripped). Dipped top first into shino opalesence (Wiping that off the wax resist). Lowest point of shino was about 1 3/4" from the bottom.
Opposite side of last item. Tenmoku -quickly, seems thin. 2 stripes around with wax resist (which dripped). Dipped top first into shino opalesence (Wiping that off the wax resist). Lowest point of shino was about 1 3/4" from the bottom.
two coats of Albany Black (took forever to dry, seems thick)
dipped into white about 4 secs. Top stripe is copper carb wash which went on dry and sort of flaked; may be on kind of thick. Lower stripe is red iron rutile.
Dipped in Pete's Red, let dry, then dipped other half (to overlap) in white
Bottom & lid - Albany Black. Handle - Pete's Red, note the red turned out clear in places as it often does.
Rich Matte Blue 3 seconds then dipped top in clear very quick.
Dipped the whole thing in Shanner's gold, then dipped half (on left side of picture) in clear 3 seconds. Note where it ran at edges of clear.
Rich Matte Blue quick in & out dip, dipped top in white very quick
Dipped in Hoover Blue, 2 seconds, then clear very quick. No clear inside.
Dipped half in Nova Green quick then other half (overlapped) in Shanner's Blue. Note canvas texture shows through Nova Green.
Albany Black. In this firing almost all of the Albany Black came out coppery.
Pete's Red. Note how glaze "broke" to clear on top edge.
Pete's Red all over, top edge dipped in white.
Shanner's Blue to 3/4" of top. Then, dipped top in Opalescent Shino. Note the patterns that developed in overlap area are different on inside than on outside. Also, glaze blistered or bubbled at bottom of overlap.
Poured Oribe inside and dipped top in Oribe. Dipped bottom to barely overlap in Nova Green.
Poured Shanner's Blue inside and dribbled around top. Dipped to within 1/2" of tip in Chun Mottled Blue for 3 seconds.
Dipped all in Nova Green then wiped off striped and waxed over some stripes. Dipped in Chun Mottled Blue.
Dipped in Chun Mottled Blue for 3 seconds.
Seacrest Purple. Note how it becomes brown where it "breaks" on edges.
Dip half in Shanner's Blue then dip other half to overlap in White.
Opalescent Shino, 1 second on bottom, 3 seconds on top. Very little color developed.
